Knotty Bear getting all Knotty again!

How Do All ;-)

So, it's been a while since I did anything new on the knotting front, and when I get the urge to tie something I don't hold back!
I decided to tie a long pineapple knot with a varied pattern, just to make sure I was still on top of my game.

Below is a picture the finished Pineapple Knot being examined by Buddha.
I think he probably approves.

This is a 90 part x 48 bight, 6 Pass, Type 6 Pineapple Knot, with a varied interweave, tied over a beach combed fishing net float which I found on the beach near my old home town of Barrow-In-Furness

There are loops at each end formed from one long length of 10 strand trapezoidal braid U6, O2, spliced and stitched into a continuous strop.

There are two 12 part x 12 bight, 2 Pass, Type 2 Pineapple Knots sitting either side of the main knot, with a foundation of 8 bight, Single Strand Matthew Walker Knots.

All tied in 1.5mm line.

The braiding of the 10 strand trapezoidal braid in my braiding clamp.

The total length is 190 mm (7.5") x 45 mm (1.75") This would make one very large and very buoyant key fob for your boat keys, or a very nice light or fan pull handle, or the grip on a dirty bag, etc. etc..

The main Pineapple Knot is actually made up from 6 separate 15 part x 8 bight Turk's-Head knots, these are all interwoven into one single knotted covering. the fact this has a varied pattern makes it that much more special.

If you are a Knot Tyer and wish to try your hand at this interweave, or at least one very similar which is easily altered to make this interweave, bearing in mind you should be at least able to tie a standard multi pass Pineapple Knot, then please check out my help tutorial here: Pineapple Knot interweave tutorial. please note, this link will open a new window!

A close up of the finished Pineapple Knot, being examined by Buddha and in my hand for an idea of size

Thank you for looking,
Take care,
Barry ;-)

Single Strand Matthew Walker Knots.

Here is a picture of a 21 bight Single Strand Matthew Walker knot made with 3mm Bitumee; a tarred nylon solid braid.
This knot was made using the same method described below.
Essentially this knot is nothing more than a collection of carefully interlinked overhand knots in a single line, the trick is in the dressing.
The knot pictured has not been painted or stiffened it is pretty much self-supporting if you handle it with care.

I hope this article sheds a little light on the making of this very handsome and practical knot.

Single Strand Matthew Walker Knots.
(Edited from an article published in Knotting Matters 102)

How Do All ;-)
With reference to an article by Mr John Halifax in KM #95, page 16 “The Single Strand Matthew Walker Ring Knot” and also an addendum to the afore mentioned article in KM #96 page 8 in which John asks; “ if anyone has knowledge of this concept of ring knots, please speak up.”

I am very sorry for my very late reply to this question (too busy getting side tracked with other things).
I had asked a similar question a few years back when I submitted what I thought could be a new knot (a single strand Matthew Walker) to Nigel Harding as I could not find any other reference to this type of knot in any of the available material at the time.
I had also browsed the Knotting Matters index published eons ago and found a reference to a single strand Matthew Walker knot in KM # 42, published in early 1993 so I also asked Nigel if he could check this issue for me to see if the knot I had ended up with was the same as the one mentioned.

Nigel was very kind and made me a copy of KM 42 so I could take a look and decide for myself, on page 27 was a large heading at the top of the page “Single Strand Matthew Walker” The article was written by Neil Hood and his diagrams are dated April 1991.
This was the very same type of knot I had made and tried to submit to Nigel. This type of Single Strand Matthew Walker knot can be made with as many passes as is required, so making a full tucked Matthew Walker knot with anything from One to a Hundred or more Spiralling strands is possible with just one single strand, no need to find somewhere to hide all those ends so making for a very useful knot to decorate bell ropes, lanyards and the like.

Also worth noting is the fact that when braiding some Turk’s-Head knots the first few passes made can be a single strand Matthew Walker knot in their own right; like the 3 pass Headhunter’s knot for instance, (see Bruce Grant’s “ Encyclopedia of Rawhide and Leather Braiding”, Page 413, figure.1) this figure is actually depicting a 3 pass single strand Matthew Walker knot, if you continue this knot by going over all at the front (going down) and under all at the back (going up) you can enlarge this single strand Matthew Walker to any size you like.

Here is a diagram I made in 2005, using Bruce Grant’s drawings of a Headhunter’s knot of two passes as my base drawings.
My drawing shows how to tie a full-tucked 6 pass, single strand Matthew Walker knot.
If you decide try this knot for yourself please let me know what you think and if possible please send me a photo ;-)

Note: I make these knots over a plain tube or mandrel, I do not use pins or any other method to guide the knot other than holding the bights with my hands, alternatively you can use a pinned tube or mandrel if you prefer.